Full Step-by-step Guide for Installing a New Shower Unit

Call Today

How do you really feel in relation to How to Install a Shower Enclosure ?


How to Build a Shower Enclosure for Your DIY Bathroom
A successful shower setup requires cautious planning as well as a great deal of work. In most cases, you will require to do three kinds of jobs: mounting walls, mounting the plumbing, and completing wall surfaces.

Prep work


First of all, you need to decide on the kind of shower that you desire to install. It is necessary to determine whether the picked shower can coping with specific systems and can control a secure degree of water via the boiler. The majority of shower devices nowadays are designed to be versatile to various water stress (such as kept warm water and also cold mains).
It is likewise vital to take into account the water stress and also the preparation of the piping and also water drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower system can be connected to the bath faucet based on your need, and the water temperature can be adjusted through the taps. Push-on mixers are cheap and exceptionally straightforward to set up. However, although the pipe link is easy, it is easily removed. Furthermore, it is inconvenient to readjust the temperature.

  • Bath/Shower Mixer: The pipe and spray of this type of shower are incorporated with a bath mixer faucet, and also the temperature level can be adjusted with the bathroom taps. It is an extremely affordable option as well as no additional plumbing is entailed. Nevertheless, the bath/shower mixers additionally suffer from inconvenient temperature control choices.

  • Handbook Mixer: The tube and also spray of a hand-operated mixer shower device belong of the wall surface device and also the cold and hot water products are attached to a solitary valve The temperature and stress of the water are managed with either one or a range of handles (in a lot more costly showers). Although temperature control is much easier in hand-operated mixer kinds, they are a lot more costly than the previously discussed mixers. They additionally require added plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The hose as well as spray of this shower type belong of the wall unit as well as the cold and hot water supplies are attached to a single shutoff here also. It is total with an integrated stabiliser to self-adjust the water temperature and also to prevent it from coming to be too hot. Among the biggest benefits of a thermostatic mixer shower kind includes practical temperature level control. Nonetheless, it is the most costly of the various mixer options.

  • Power Shower: A power shower is a single system consisting of an effective electric pump that is capable of changing both the water stress as well as temperature level. This sort of shower can be fitted if there is supply of water from a cold water cistern as well as a hot water cylinder. A power shower makes the adjustment of both pressure and temperature easy. On the other hand, it disagrees for water heated directly by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats the water electrically. It is necessary to note that for this shower type to be mounted, the mains stress requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level and stress to be changed through a handle. Versions with temperature level stabilisers are much better as they remain untouched by various other taps in other places being used within the home. A major drawback of electrical showers is that the control knob just allows for the alternative of heats at less stress, or lower temperature levels at a greater stress. This is problematic in the winter when the spray is typically weak and also the mains water is chillier. Nonetheless, this problem is dealt with in some versions which are available with a winter/summer setup.

  • Method


    Depending upon the sort of shower you wish to install, the shower head need to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it needs to have a check shutoff.
    Before beginning, it is recommended to note the settings of the shower head and also control, and to plan the pipe-work entailed. In addition, the water drainage system to get rid of the drainage will certainly require to be prepared. Both positions of the cable course as well as the shower switch will certainly likewise require to be taken into consideration if an instant or electrical shower device is being set up.
    Make use of the direction overview offered with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to remove the supply of water. In order to shield the pipes, they must be offered a waterproof covering and additionally fitted with separating valves. The pipes can then be hidden into the wall surface and smudged over to neaten the total look.
    Fit the base tray, shower head, and also fittings.
    Link the major shower control to the pipes that will certainly be supplying the water (This may need a women screw string adapter).
    Reconnect the supply of water as well as examination the pipes for any type of leaks, as some might need firm.
    If you are mounting an electric shower, bear in mind to turn off the power supply prior to making any kind of electrical connections. Once these connections have been made (there must be support within the user's manual), the power supply can be switched over back on.

    Readjusting Water Stress to Match Your Shower


    The cold water storage tank can be raised to a better elevation (in some cases just 150mm (6inches)) by installation a solid wood support below it - possibly made up of struts and also blockboards. If you pick this choice, the main and circulation pipes will additionally need to be raised to meet the brand-new height of the storage tank.
    Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked into the power supply in order to run.

    Piping and Water drainage


    It is best to use 15mm size supply pipes, and also make the runs to the shower as brief and straight as feasible so as to preserve optimal pressure as well as reduce warm loss. In addition, by minimising using joints for pipe corners, you can lower the resistance in the flow of the water system. You can attain this by bending the pipes instead.

    A Lot Of Usual Mistakes


  • Breaking or neglecting neighborhood code limitations.

  • Making use of pipelines that are also small.

  • Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

  • Not utilizing tape or pipe compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not installing an air gap filling for components.

  • Reducing supply stub outs also brief to set up the shutoff valves onto after the finished wall remains in area.

  • Not effectively lining up tubing into installations or quit valves. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will create a leak.).

  • When transforming the water back on in your house, always run the outdoors pipe valve or purge your toilets to hemorrhage dirt and also air from the lines. This debris can create issues in your sink faucets as well as various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    We hope you enjoyed our piece on How to Install a Freestand. Thanks so much for spending some time to read through our blog. I beg you take the opportunity to share this entry if you enjoyed reading it. Thank-you for taking the time to read it.


    Maintenance Sign-Up

    Leave a Reply

    Your email address will not be published. Required fields are marked *